Schedule 10 is a thin-walled pipe, offering advantages in material saving while maintaining strength requirements. It is suitable for low-pressure or harsh corrosive environments.
Materials and Manufacturing Standards
Material Requirements: Carbon steel is the base material, but stainless steel and alloy steel can also be used. Some products require special grades to meet high strength and high performance requirements.
Manufacturing Methods: The main manufacturing methods are seamless manufacturing and welding. Seamless pipes are of higher quality, have better performance, and stronger pressure resistance. Welded pipes have weld seams and their performance is not as good as seamless pipes, but the manufacturing process is relatively simple, making them suitable for large-scale manufacturing needs.
Certification Standards: Supports international standards such as API 5L (oil pipelines), ASTM series (industrial general), EN, DIN, and JIS.
Comparison of SCH 10 with Common Wall Thickness Grades
| NPS | Sch 10 (mm) | Sch 40 (mm) | Sch 80 (mm) |
| 1” | 2.77 | 3.38 | 4.55 |
| 2” | 2.77 | 3.91 | 5.54 |
| 4” | 3.05 | 6.02 | 8.56 |
| 6” | 3.05 | 7.11 | 10.97 |
| 8” | 3.05 | 8.18 | 12.70 |
As shown in the diagram above, the wall thickness of SCH 10 pipe is significantly smaller than that of SCH 40/80. It is more suitable for applications with lower pressure requirements but prioritizing lightweight, cost-effectiveness, and construction efficiency.
Applicable Standards for Schedule 10 Carbon Steel Pipe
1. ASTM A53 / ASME SA53 (Black Pipe & Galvanized Pipe)
A53 allows for wall thicknesses covering Sch 5, Sch 10, and Sch 40, among others. Sch 10 is primarily used for ERW welded pipes. Because A53 is more geared towards low-pressure transport and structural applications, the thin-walled Sch 10 perfectly suits these applications.
2. ASTM A106 / ASME SA106 (High-Temperature Seamless Pipe)
A106 is a standard for seamless carbon steel pipes used for transporting high-temperature (up to 426°C) and high-pressure fluids. Sch 10 is not commonly found in A106.
Why is Sch 10 not commonly used in A106?
Typical operating conditions for A106 are high temperature and high pressure. Sch 10 wall thickness is too thin and unsuitable for pressure bearing. Engineering designs usually require a minimum Sch 40. Therefore, A106 Sch 10 is a special case and not the mainstream choice.
3. API 5L (Oil and Gas Pipeline Pipe)
API 5L is usually expressed directly as wall thickness plus outer diameter, for example: OD 219.1 × WT 6.4 mm. However, in engineering designs, API 5L is matched with the Schedule, resulting in: Sch 10 ≈ API 5L 3–3.5 mm (depending on OD).
Like A106, API 5L rarely uses Sch 10, mainly because mainstream oil and gas transportation pressures are high. API pipelines typically require thick walls (Sch 40~160), and thin walls are unsuitable for long-distance underground burial.
4. ASTM A135 / A795 (Fire Sprinkler System Pipes)
This is the mainstream standard for Schedule 10, specifically designed for fire protection systems and low-pressure fluids.
Why is Schedule 10 commonly used in fire protection?
Thin walls → Lightweight → Easy to hang; Suitable for grooved fittings; NFPA (National Fire Protection Association) approved; Easy to cut and machine; Significantly lower cost than Schedule 40.
SCH 10 Carbon Steel Pipe Available Dimensions (Schedule 10 Pipe Dimensions, Weight & Thickness)
Nominal Diameter – 1/2” to 36” NPS
Wall Thickness: 0.065 – 0.312 inches
Outer Diameter: 10.3 – 914.0 mm
Length: 6 m / 12 m (customizable)
Port Type: Plain End / Beveled End / Threaded
Applications
Primarily used in low-to-medium pressure industrial systems or general fluid transport applications. Typical uses include:
Fluid Transport: Piping systems for low-corrosion media such as water, oil, gas, or steam;
HVAC: Piping ventilation, heating circulation, etc.;
Structural Uses: Lightweight support components, scaffolding (e.g., used with steel fasteners);
Special Treatments: Can be fitted with cement lining or anti-corrosion coatings (e.g., "Cement Lined Carbon Steel Pipe") for corrosive environments or to extend service life.
Read more : Schedule 10 pipe dimensions, weight & thickness or Schedule 10 vs schedule 40 steel pipe